Category: Roofing

Types of Roofing Installation

A healthy roof is an essential component of any home. However, Montana Roofing Solutions installation is a large-scale project that can be intimidating to homeowners.


Fortunately, you can ease your nerves by knowing what to expect from the process. The first step is obtaining all the necessary permits for your project.

Roll roofing is a quick and cheap option for covering roofs. The material comes in a variety of colors and can be applied over an existing degraded roof to save on costs, but it can be more difficult to maintain than other roofing materials. Roll roofing also offers limited insulation properties, making it a poor choice for homes in climates with high rainfall or severe wind conditions.

Roll roofs are usually installed in two layers: a base sheet and a cap sheet. The sheets should overlap on their sides and ends by a minimum of 3 inches, so water cannot seep in between them. The overlapping edges and vents should be sealed with roofing cement to protect against leaks. It’s recommended to apply a reflective roof coating over the top of the roll roofing to reduce heat absorption and extend its lifespan.

In addition to the above, homeowners can help their roll roofing last longer by ensuring that downspouts are properly draining and that any interior roof drains are free from debris or buildup of snow or ice. Regular inspections are the best way to spot potential problems before they become costly or dangerous. Especially in the fall and spring, when harsh winter weather often occurs, these routine checks can help keep your roof in tip-top shape and prevent costly repairs or replacements in the future.

Unlike shingles, which must be installed one at a time, roll roofing can be laid out and then nailed down with a staple gun. This is a more efficient method of installation, which means it’s easier to cover larger roof surfaces with roll roofing than it would be with shingle installation.

The main drawback of this type of roof is that it doesn’t offer as much durability as other roofing options and can be less appealing for a home’s appearance or resale value. Additionally, it’s not a good fit for steep-sloped roofs and may not provide adequate drainage on these types of roofs.

If you’re considering a roll roofing system for your roof, it’s important to consult with an experienced roofing contractor to make sure the roof is prepared properly. This includes removing any gravel or debris that could puncture the roofing and ensuring that downspouts are draining properly. It’s also a good idea to inspect the roof periodically, particularly after significant weather events or in the case of an older home, before any major maintenance work is done.

Three-Tab Asphalt Shingles

In the roofing industry, there are several different types of asphalt shingles to choose from. Three-tab shingles are the most popular type of residential shingle and can be found on most homes. They offer a simple, traditional style that is affordable and durable. 3-tab shingles are available in a variety of colors and can complement many home aesthetics.

In terms of durability, 3-tab shingles are one of the most cost-friendly options and can last up to 20 years. This makes them a great choice for homeowners on a budget who still want to protect their home from the elements.

Three-tab shingles get their name from the fact that each individual shingle has three tabs cut into the bottom edge. These tabs fit together like puzzle pieces when they are installed, and they create a uniform look for the roof. The overall composition of these shingles includes an asphalt and adhesive base layer with outer granules backed by fiberglass. In comparison, architectural shingles, also known as dimensional shingles, are more substantial and appear thicker than 3-tab shingles. This is due to the fact that they have a stronger binder, and their outer granules are of a finer quality.

When choosing a shingle type for your home, it’s important to consider the longevity and the look that you would like. The durability of a shingle can have a significant impact on the way that it looks and performs, especially when it’s exposed to the elements every day.

The lifespan of a roofing material depends on how well it’s made, the materials used to make it, and the environmental conditions where it’s used. As long as the shingles are properly installed and maintained, they will last for several decades.

There are 3 primary roofing shingle types available: 3-tab, architectural, and premium. Each of these shingle types has its own set of pros and cons. To help you decide which shingle is right for your home, we’ve provided an overview of each type: basic information, look, costs, lifespan, and warranty.


Metal roofing is often associated with industrial and commercial buildings, but it can also be found on residential structures. It comes in a variety of shapes, sizes and colors, and can be used to create unique architectural designs. When installed properly, metal can add both strength and beauty to a building’s exterior. A good installation process involves a number of steps, including proper preparation and adherence to local code requirements.

To begin your project, make sure the roof is free of debris and that you have a clear area for working. Metal panels and trim have sharp edges, so only trained installers should handle them. Once the work begins, you’ll need to protect yourself and your surroundings with gloves and goggles. It’s important to use a safety harness when working on a metal roof because it can be dangerous if you fall.

Obtain the necessary permits for your project before you start, and be sure to follow any regulations set by your jurisdiction. It’s also a good idea to have a qualified inspector on hand during the process to ensure that everything is in line with local code and safety standards.

Begin by measuring the roof to determine how much material you’ll need. You should always purchase 10% to 15% more material than you think you’ll need. This extra material will allow you to account for any mistakes you might make or the fact that you might have to cut a piece of metal to size.

Once you’re ready to install the panels, begin at the eaves and work your way up. Ensure that the edges of each panel overlap at least one inch with the next one, and apply silicone sealant to both the long edge and the short edge of the first panel you lay down.

After the overlapping panels are in place, install the flashing. Flashing is a strip of metal that seals the different sections of the roof. It usually covers joints that are less than 140 degrees, such as the eaves or valleys of the roof. To install these pieces, you’ll need to have a tool that will bend sheet metal to fit the needed shape.

Architectural Asphalt Shingles

There are numerous roofing materials to choose from when you’re looking to re-roof your home or construct a new roof for your construction project. The type of material you select will have a major impact on its durability, aesthetics, longevity, and cost. Traditional asphalt shingles are one of the most common roofing options available to homeowners. They’re affordable, durable, and easy to install and repair.

Architectural or dimensional asphalt shingles are a bit more expensive than 3-tab shingles but offer better longevity and better aesthetics. They can be constructed to resemble many different types of roofing, including cedar shakes and slate shingles. They’re also known as composition shingles because they are made from a combination of materials that include fiberglass, organic felt, and mineral granules. The asphalt serves as a waterproofing agent, while the other materials provide strength, durability, and resistance to harsh weather conditions.

The primary difference between traditional 3-tab shingles and architectural shingles is in their thickness. The base mat on an architectural shingle is thicker than that of a 3-tab shingle, and it comprises stronger adhesives and more granules. This results in a sturdier shingle with improved wind resistance and longer warranties.

In addition to their increased durability and longevity, architectural shingles are also available in a much wider array of colors than 3-tab shingles. This allows you to create a distinctive look for your roof that can add to your home’s curb appeal. They can also be crafted to resemble other types of roofing materials, such as wood or slate, which might make them a more attractive option for older homes with existing roofs that still need protection.

It’s important to understand the differences between these two different types of shingles when choosing the right roofing material for your home. The choice you make will depend on a number of factors, including your budget, how long you want the roof to last, and whether or not you plan to live in the house for long enough to recoup the initial investment. The best roofing contractors in Fairhope can help you determine which type of shingle is best for your home.

The Installation of a Roof

A roof is the shield that protects a house against blazing sun, pounding rains, and gusty winds. It also adds beauty and curb appeal to a property.


Roof installation is a complex process. It requires a team of experts to do the job right. To minimize disruptions, homeowners need to prepare for a new roof by moving outdoor furniture and covering landscaping with tarps. Visit to learn more.

The installation of a new roof starts with the preparation of your property. An expert roofing team will talk you through the materials and options that make sense for your goals, architecture and budget. Once you’ve decided, the roofer will order the roofing material and schedule its delivery.

During this part of the process, it’s crucial that your yard and patio remain clear. The roofing crew will need to move around furniture, grills, potted plants and lawn ornaments so they can safely access your home’s exterior. If you have children, consider making arrangements for them to stay with friends or family during the roof replacement. The loud noises and construction equipment can be unsettling for kids, and metal flashing can cut or scratch them if they touch it.

You’ll also want to remove any outdoor items that are too close to the house, such as garden tools or shed contents. This will prevent your belongings from becoming strewn about the yard and potentially damaged by falling shingles or debris during the roof replacement. It’s also a good idea to cover any areas of your landscaping that will be exposed during the roof replacement, such as flower beds or paved areas. Using tarps is a cheap and effective way to protect these areas from the elements.

A top-tier roofing team will take care to remove any aging or damaged shingles and decking from the old roof before starting on the new one. They’ll also take this opportunity to inspect the roof deck and make sure it’s strong enough to support the weight of a new roof. This inspection is important to avoid any surprises down the road and to guarantee a long-lasting roof that will protect your home for years to come.

Once the old roof is removed, the roofing crew will set up the underlayment and start installing the shingles. Whether you opt for asphalt or metal, your roofer will add the shingles in layers, staggered and nailed. This step also involves the installation of a drip edge, flashing and any other architectural features that are necessary for protecting your home from moisture intrusion.


When you hire a professional to install your roof, make sure they have the necessary materials. Nothing ruins a roofing job faster than having to stop the work to go to the hardware store for something you forgot. Make a list of all the items you need to complete the project and keep it handy so you don’t forget any essentials.

Roofing contractors will need plenty of materials to tear off the old roof and install the new one, including plywood boards that form the base of your roof’s structure. They’ll also need underlayment, which is a waterproof layer that protects the wood decking and wooden rafters or wooden trusses on which the main roofing material will be installed.

Other necessary roofing materials include shingles or other material that creates the aesthetic you’re going for and is durable against weather conditions in your area. Asphalt shingles are common because they’re inexpensive and provide good protection against the elements. Wood shingles like cedar shakes and pine shingles are high-end options that are long-lasting and beautiful, but they’re more expensive. A metal roof is another option that’s durable and comes in a variety of styles. Metal shingles are small and fit easily around chimneys or other features, while corrugated metal panels and standing seam metal roofs are more durable and long-lasting.

To make your roof more water-resistant, you can have flashing and drip edge installed. This is a non-corrosive piece of metal that is placed along the edges of your roof where it meets other areas or structures, such as a vent, skylight, or chimney. It directs water away from those areas to prevent leaks in the wood decking.

You can also have a copper roof or other types of metal roofs to provide an elegant, attractive look. Slate is also an option but is very expensive and requires special care to keep it in good condition.

You’ll want to prepare the area outside your home for the work by pruning any trees that encroach on the roof or are too close to it, and moving any outdoor furniture, ceramic landscaping features or other items that might be damaged by falling shingles. Invest in large tarps to cover plants and other items that you can’t move, or at least pound protruding nails flat so they don’t tear holes in the tarps when it rains.


The installation of a roof is the process of covering the top of a building with durable and protective materials. The roof is designed to shield the structure from rain, snow, sunlight, wind and extreme temperatures. It also adds aesthetic appeal and value to the home.

The first step in roof installation is to prepare the work site. This means removing anything that could get damaged or swept away, covering surrounding areas with tarps and ensuring that everyone working on the roof is wearing appropriate safety gear. In addition, it is important to make sure the weather is cooperating by checking the forecast frequently. Rain or ice can make it unsafe to be on the roof, and it may be necessary to delay the project until conditions are favorable.

Once the roof is clear, the contractor will begin installing the underlayment and shingles. The underlayment is an additional layer of protection that prevents water from seeping through to the underlying layers. The shingles are then installed over the underlayment and fastened down with cap nails. The drip edge is then nailed down to the underlayment and to the existing roofing, and the ice and water barrier is nailed down along the edges.

Before the shingles are installed, the roofer will inspect and replace any flashing that is worn or damaged. This is usually made of aluminum or galvanized steel, and it is installed over joints in the roof to prevent water leakage. The flashing around the chimney, skylights and vents will be inspected as well. It is important to have high-quality flashing in these areas to ensure a waterproof seal.

After the shingles are in place, the roofer will install any vents that are needed for the structure. This can include ridge vents, gable vents and roof penetrations such as sewer vents, curve vents for bathrooms and kitchen ranges and more. It is important to install these correctly, and the roofer will often use a metal caulking to ensure a strong and long-lasting seal.

Once all the new materials are in place, the roofer will install a ridge cap to finish off the shingles and prevent water from entering the structure. The ridge is the peak of the roof, and it is capped with special shingles that are installed over the top of the shingle row. The ridge is then sealed to the rest of the roof with a bead of roof cement.


Choosing high-quality roofing materials is important, but they won’t be able to do their job if they aren’t installed properly. That’s why a roofer will conduct an inspection before beginning work to make sure everything is in order. In addition to looking for shingles that are cracked or buckling, they’ll also check the caulking and flashing around penetrations like skylights and chimneys for damage.

Then they’ll go inside the house and examine ceilings and walls near the roof for signs of water leaks. These might include stains or discolored drywall, which can indicate that the roof is leaking. They’ll also look for missing or curled shingles, as well as moss and rust on the decking.

If they have access to the attic, they’ll inspect its condition and rafters, joists, and fascia boards for signs of rot. They’ll also check for sagging or uneven roof planes and examine gutters, downspouts, and soffit vents to make sure they’re in good shape and that they’re adequately ventilating the roof.

Leaking and moisture are the most common problems with roofs. To prevent them, a roofer will look for things such as curling or loose shingles, shingle granules in the gutter, and moss and lichen on the decking. The roofer will also determine the condition of the roofing material to see if it has reached the end of its life and will need to be replaced or repaired.

One of the best tools that a roofer has is a thermal imaging camera. This device can show areas of heat loss by showing two distinct colors – blue means cool air is escaping, and red indicates hotter air is coming in. Once the roofer locates these hot spots, they’ll be able to pinpoint the source of the leak and take the necessary steps to fix it. If they can’t get on the roof for any reason, such as weather or safety concerns, a drone inspection may be used instead. This method is also useful for examining roofs that are very steep or inaccessible.

What Is Roofing Installation?

Roofing installation is a noisy process. It involves tearing down the old roof, creating piles of debris, and carting it away to a dumpster. If you have children or pets who are sensitive to loud noises, they should be moved out of the house during this time.


One important consideration is whether the roof meets fire codes in your area. The material must also be suitable for the climate. Visit to learn more.

The cost of a new roof can vary significantly depending on the type of roofing materials used, the house size, and location. Typically, 40% of the budget will be spent on the materials and 60% on labor, but this can vary depending on your region. You will also have to pay for permits, if required.

Before starting any work, a professional will inspect the existing roof deck and make repairs as necessary. It is important to ensure that the roof deck is strong enough to support the weight of a new roof. A good rule of thumb is to have a structural engineer examine the deck before installing a new roof.

There are many factors that affect the cost of a new roof, including the type of shingle and the installation method. For example, clay tiles are more expensive than asphalt shingles and require a different installation process. Other types of roofing material include metal and slate, which are more expensive than shingle products. Some of these options are also more durable than shingle roofs, but they may need to be replaced more often.

A roof is a large investment, so it’s important to get estimates from multiple contractors before making a decision. Most roofing companies will say that the cost of a roof depends on your specific situation and won’t publish pricing until they have inspected the roof. This is a reasonable position to take, as the exact cost will depend on the condition of your roof and the type of roofing material you choose.

The average cost of a re-roofing project is $9,117. This includes removing the existing shingles, making any needed repairs to the roof deck, and installing a new layer of underlayment and shingles. Re-roofing is a great option for older homes with aging shingles. It is also more affordable than a replacement because it eliminates the expense of removing and disposing of the old shingles.

Choosing a new roof is a significant expense, but it can save you money in the long run by extending the lifespan of your home. If your roof is showing signs of aging, it’s a good idea to replace it with a new one as soon as possible. If you don’t, the damage to your home could be extensive.


Roofing materials are a vital part of your roof’s integrity and overall performance. Choosing the right material depends on your budget, climate and aesthetic preferences. A professional roofer can help you choose the best materials for your home and its needs. They will also take into account any local code requirements and the durability of different materials in your area.

Asphalt shingles are one of the most popular roofing materials. They are affordable, durable and come in a variety of colors. They are easy to maintain and can last up to 20 years. In addition, they are highly recyclable. Metal roofing is another option that adds value to your home, and it can withstand a wide range of weather conditions. It is important to work with a company that has experience installing these types of roofs.

Wood roofs add a natural beauty to your home and are ideal for older or historic homes. They can be made from cedar or redwood, and are available in shingle or shake form. Shingles are sawmilled for uniformity, while shakes are thicker wedge-shaped slabs that have a more rugged appearance. Wood is not as long-lived as other roofing materials, and it may need to be treated with fire retardants or chemical preservatives.

Clay tiles are another beautiful option that are often seen on Mediterranean- and Spanish-style homes. They can be unglazed, like terra cotta, or factory-fired with a light or cool glaze. They are highly durable and energy efficient, but they can be expensive to install.

Rolled roofing is a cheap, quick-to-install option for low-slope roofs. It consists of large rolls of asphalt material topped with mineral granules. It is usually installed over an existing roof, but it can be used to upgrade an older roof. It is not recommended for flat roofs, and it can leak easily in cold weather.

Membrane roofing is an alternative to shingles and is ideal for low-slope or flat roofs. It can be made from a wide range of watertight materials, including PVC, Neoprene and rubber EPDM. It is often black, which can absorb heat and raise utility bills, but it is also available in white. It can be installed over an existing roof or under other roofing materials, and it provides protection from ice dams and leaks in vulnerable areas like the eaves and valleys.


A roof installation is the process of putting a new or replacing an existing roof over a building. It involves many steps, and should be done by a professional roofing contractor. A quality roof can provide protection and increase the value of a property. In addition, it can reduce energy costs and protect against damage from storms.

Before the actual work begins, the contractor should inspect the existing roof to make sure that it is in good condition. If the roof deck is damaged, it needs to be repaired before the new roof can be installed. In addition, the contractor should remove any rotting or insect infestation from the attic and roof penetrations.

After the repair work is complete, the roofers can begin installing the new shingles or other roofing material. They usually start at the eaves and work their way up, overlapping each row to create a watertight barrier. They may also install flashing and a drip edge to further protect against leakage. In addition, ridge vents are installed to allow airflow through the attic and prevent moisture buildup. Finally, a ridge cap shingle is installed to provide an attractive finish and additional protection from weather elements.

It is important to keep in mind that re-roofing is dangerous work, and it requires proper safety equipment. This includes a hard hat, harness, and ladders with proper rung ratings. It is also important to cover any plants near the work site with plastic sheeting. It is a good idea to have a roll-off dumpster placed close to the house so that it is easy to throw away the old shingles.


When hiring a roofing contractor, you want to make sure that the company you choose offers a warranty for the work they perform. A good warranty will give you peace of mind and ensure that the roof is installed properly. This will help you avoid any potential problems in the future and protect your investment.

There are three basic types of warranties: manufacturer, material and workmanship. Each type of warranty has its own specific conditions and limitations. A good roofing company will have a warranty for both the materials used and the workmanship. They will also offer warranties that are transferable to new owners of the home if you decide to sell it in the future.

The manufacturer’s warranty covers the roof materials against manufacturing defects for a specific time period. For example, most manufacturers offer a 30-year warranty for architectural shingles. However, this is a prorated warranty, meaning the coverage decreases over the years. You should always read the fine print to find out what is covered and what is not.

A roofing contractor’s warranty covers labor costs associated with installation and repairs. It typically lasts one to five years. You should also ask your contractor about their manufacturer labor warranties. These are usually transferable to the new homeowner, and they can help you get a better deal on a new roof when it comes time to sell your house.

You should keep in mind that you may void your warranty if you don’t maintain the roof properly. For instance, you should repair broken shingles or tiles as soon as possible, and replace worn flashing materials. If you don’t do this, the manufacturer will void your warranty. Also, it is important to use only roofing materials approved by the manufacturer.

Many roofing contractors offer extended warranties or transferable warranties. These are more comprehensive than standard manufacturer and workmanship warranties. They often include more items, such as underlayment and ventilation equipment. Most of these warranties are available only through roofing companies that are certified by the manufacturer, and they cost more than standard warranty plans.